IRWIN Record - 119 Medium-Duty G-Clamp

IRWIN Record Medium-Duty Forged G-Clamp Size: 152mm (6 in)

from £7.46 inc VAT

view options

IRWIN Record - 120 Heavy-Duty G-Clamp

IRWIN Record Heavy-Duty 120 Series G-Clamp. Size: 203mm (8 in). Throat depth: 89mm (3 1/2 in).

Was £36.55 Now from £18.76 inc VAT

view options

IRWIN Record - 135 Series Heavy-Duty Sash Clamp

1 x Irwin Record 135/9 Heavy-Duty Sash Clamp - 1650mm (66in) Capacity.

from £58.96 inc VAT

view options

IRWIN Record - 136/9 T-Bar Clamp 1650mm (66in) Capacity

IRWIN Record 136/9 T-Bar Clamp 180cm (72in). Bar Length: 1800mm (72in).Capacity: 1650mm (66in).

£96.22 inc VAT

IRWIN Record - M130 Clamp Heads

IRWIN Record 130N clamp heads. A bar clamp of any length can be easily made using a piece of timber 1in thick. Cast iron head and slides incorporating large thrust surfaces. High-quality steel handle and screw with pin attached by welded chain.

£30.17 inc VAT

IRWIN Record - Centre Cut High Tensile Bolt Cutters

IRWIN Record BC924H Cam Adjusted High Tensile Bolt Cutter 610mm (24 in).Overall Length: 610mm (24 in).Max Cutting Capacity: 7.9mm (5/16 in).

£154.13 inc VAT

IRWIN Record - Centre Cut High-Tensile Bolt Cutters

IRWIN Record 936H Arm Adjusted High Tensile Bolt Cutter 910mm (36 in). Overall Length: 910mm (36 in). Max Cutting Capacity: 11.1mm (7/16 in).

from £166.34 inc VAT

view options

IRWIN Record - 1ton-e Workshop Vice 100mm (4in)

The IRWIN® Record® 1ton-e Workshop Vice is a compact heavy-duty workshop vice suitable for use by both the amateur and professional craftsman. The body and slide have been ground to exacting standards and feature a machined anvil and replaceable steel jaw plates. High grade ACME thread main screw with the capacity to clamp over one ton between the jaws, a safety stop prevents the slide from...

£67.55 inc VAT

IRWIN Record - 414 Drill Press Vice 100mm (4in)

This Record Drill Press Vice is designed for drill press work, the sliding jaw is a non-lifting swivel type capable of holding any shape of workpiece. The horizontal and vertical vees accommodate round sections securely and the base is slotted to enable the vice to be bolted to drill press tables. Base, end face and side faces are machined to assist quick and accurate positioning. Features include...

£198.60 inc VAT

IRWIN Record - Mechanic's Vice

1 x IRWIN® Record® No.8 Mechanic's Vice 200mm (8in)

from £76.60 inc VAT

view options

IRWIN Record - No.23 Fitter's Vice 115mm (4.1/2in)

1 x IRWIN® Record® No.23 Fitter's Vice 115mm (4.1/2in)

£592.31 inc VAT

IRWIN Record - Pro Entry Mechanic's Vice 100mm (4in)

The IRWIN® Record® Pro Entry Mechanic's Vice is fully machined on all load bearing surfaces for smooth and trouble free operation. It features a safety stop to prevent the slide being separated from body and a fused handle, Acme twin start thread for smooth and fast operation and replaceable hardened steel jaws (55 HRC). Specification Clamping Force: up to 1.5 tons.Jaw Width: 100mm.Jaw Capacity:...

£52.26 inc VAT

IRWIN Record - V75B Table Vice 75mm (3in) - Boxed

The V75 is an ideal portable vice for the amateur and model maker.The built-in clamp allows it to be easily and quickly attached to a bench, table or work surface up to 1.5/8in deep. Pipe grips are incorporated below the parallel jaws.A useful anvil is included on the rear of the body. Jaw Width. 75mm (3in).

£35.59 inc VAT

IRWIN Record - Vice Jaw Fibre Grips 150mm (6in)

Designed for fitting to Record vices when holding soft or plated workpieces with highly polished surfaces to provide a firm grip without fear of damage. Special fibre more durable than lead or copper. Supplied in pairs.Size. 150mm (6 in).

£29.24 inc VAT