Broach Cutters
HMT CarbideMax 40 Broach Cutter Pilot Pin 12-17mm, Pack 2
High quality, fully ground HSS pilot ejector pin for CarbideMax 40 TCT Broach cutters. A flat side is ground onto the pilot pin to allow centre feed coolant to pass from the arbor and be directed into the centre of the broaching cut.A flat side is ground onto the pilot pin to allow centre feed coolant to pass from the arbor and be directed into the centre of the broaching cut
6.35>5 x 90mm OAL
Precision...
£13.32 inc VAT
HMT CarbideMax 40 Broach Cutter Pilot Pin 18-80mm, Pack 2
High quality, fully ground HSS pilot ejector pin for CarbideMax 40 TCT Broach cutters. A flat side is ground onto the pilot pin to allow centre feed coolant to pass from the arbor and be directed into the centre of the broaching cut.A flat side is ground onto the pilot pin to allow centre feed coolant to pass from the arbor and be directed into the centre of the broaching cut
7.98 x 90mm OAL
Precision...
£16.62 inc VAT
HMT CarbideMax 40 TCT Cutter Set 12,14,18,22,26mm + 2 pilots
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.Up to 10x longer life than traditional HSS Cutters64% Faster cuts than HSS cuttersElaborate cutting geometry for faster, quieter drillingChatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£182.70 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 12mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.
Up to 10x longer life than traditional HSS Cutters
64% Faster cuts than HSS cutters
Elaborate cutting geometry for faster, quieter drilling
Chatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£24.18 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 14mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.
Up to 10x longer life than traditional HSS Cutters
64% Faster cuts than HSS cutters
Elaborate cutting geometry for faster, quieter drilling
Chatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£28.02 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 16mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.Up to 10x longer life than traditional HSS Cutters64% Faster cuts than HSS cuttersElaborate cutting geometry for faster, quieter drillingChatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£32.22 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 18mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.
Up to 10x longer life than traditional HSS Cutters
64% Faster cuts than HSS cutters
Elaborate cutting geometry for faster, quieter drilling
Chatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£36.18 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 20mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.
Up to 10x longer life than traditional HSS Cutters
64% Faster cuts than HSS cutters
Elaborate cutting geometry for faster, quieter drilling
Chatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£40.08 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 22mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.
Up to 10x longer life than traditional HSS Cutters
64% Faster cuts than HSS cutters
Elaborate cutting geometry for faster, quieter drilling
Chatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£44.16 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 24mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.Up to 10x longer life than traditional HSS Cutters64% Faster cuts than HSS cuttersElaborate cutting geometry for faster, quieter drillingChatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£48.24 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 26mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.
Up to 10x longer life than traditional HSS Cutters
64% Faster cuts than HSS cutters
Elaborate cutting geometry for faster, quieter drilling
Chatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£52.20 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 28mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.
Up to 10x longer life than traditional HSS Cutters
64% Faster cuts than HSS cutters
Elaborate cutting geometry for faster, quieter drilling
Chatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£56.10 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 30mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.
Up to 10x longer life than traditional HSS Cutters
64% Faster cuts than HSS cutters
Elaborate cutting geometry for faster, quieter drilling
Chatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£60.06 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 32mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.
Up to 10x longer life than traditional HSS Cutters
64% Faster cuts than HSS cutters
Elaborate cutting geometry for faster, quieter drilling
Chatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£64.20 inc VAT
HMT CarbideMax 40 TCT Magnet Broach Cutter 33mm
The CarbideMax 40 Series will broach up to 35mm thickness of metal. Individually brazed cutting teeth made from Tungsten Carbide are capable of drilling through the toughest steels.
Up to 10x longer life than traditional HSS Cutters
64% Faster cuts than HSS cutters
Elaborate cutting geometry for faster, quieter drilling
Chatter free performanceThe HMT CarbideMax range uses Premium Grade Sandvik Tungsten...
£69.66 inc VAT